Ethernet Fiber media converter multimode, Fast Ethernet 2Km, SC,10/100M - 01567

Description

Technical Specifications The Converter conforms to the following standards:
Standards: IEEE802.3u Fast Ethernet 10/100Base-TX and 100Base-FX
Connectors (RJ45-UTP and Fiber SC or ST)
>Multi-mode: RJ-45 and SC/ST Connector
>Single-mode: RJ-45 and SC Connector
LED: POWER, FX 100, FX Link/Act, TX Fdx,TX Link/Act, TX 100.
Data Transfer Mode :10/100Mbps
Duplex Mode: Full or Half Duplex Mode
Power Requirement : AC 100-260v DC 1A@+5V
Ambient Temperature: 0 ～ 70℃
Humidity: 5% to 90%
Dimensions: External Power 26 x 71 x 97mm (H xW x D)
Cable: UTP Cat. 5 UTP cable
Your Fiber Media Converter carton should contain the following items:
 10/100M Fiber Media Converter
 AC-DC Power Adapter
 This User's Guide
Please notify your sales representative immediately if any items are missing or damaged.
The 10/100Base-TX to 100Base-FX Fast Ethernet Converter is fully,
*Multi-mode: SC/ST Fiber Connector
*Single-mode: SC/FC/ST Fiber Connector
*Single-mode Single Fiber: SC Fiber Connector
Six LEDs display instant status monitoring for Power, TX Fdx, FX (Link/Act), Tx (Link/Act), Fx100, Tx 100.
3. Installation
Please follow the procedure outlined below:
 Turn off the power of the device/station in the network in which the Media Converter will be installed.
 Ensure that there is no activity in the network.
 Attach fiber cable from the Converter to the fiber network. The fiber connections must be matched-- transmit socket to receive socket.
 Attach a UTP cable from the 100Base-TX network to the RJ-45 port on the Converter.
 Connect the power cord to the Converter and check that the Power LED lights up. The TP