OptiWand Pincher Soft Contact Lens Insertion Removal Tool Eye Lense Applicator

Description

OptiWand Pincher ®  Single.  Colors are Orange, Green or Blue
Using
OptiWand Pincher ®
for inserting SOFT or HARD contact lenses
Step 1: Dip your
OptiWand Pincher ®
in Contact Lens solution for lubrication!!
Step 2: Position your HARD or SOFT contact lens on the center of the
OptiWand Pincher ®
Step 3: Using your non-dominant hand spread your eye lids as wide as possible, keeping your eyelashes out of the way.
Step 4: Draw the
OptiWand Pincher ®
to your eye by looking through the
CENTER HOLE to align properly
*Aiming the
OptiWand Pincher ®
at a colored background or light will help some to focus on the CENTER HOLE*
Step 5: Once it is close enough and the contact lens makes contact with your eye, the natural surface tension of your eye will draw the contact lens to your eye.
Step 6:  BLINK, BLINK your contact into place.  Now your lens is centered on your eye.
* Make sure to HOLD EYE OPEN WIDE & hold eyelashes away to prevent blockage. *
WARNING **NEVER USE
OptiWand Pincher ®
ON NAKED EYE**
Please DO NOT USE the
OptiWand Pincher ®
if you are allergic to Liquid Silicone Rubber!
Using
OptiWand Pincher ®
for removal of SOFT contact lenses
It helps to practice pinching the soft contact lens off of a fingertip to get the feel for it before trying on the eye.
We suggest placing the soft lens on your index finger of your non dominant hand and practicing the pinch off of your finger to get a feel for actual removal.
If you pinch the soft contact lens off of a finger a few times you will be able to visualize what it takes to pinch effectively.
Step 1: Use a DRY
OptiWand Pincher ®
for Soft Contact Lens removal for best results.
Step 2: Using your non-dominant hand spread your eye lids as wide as possible, keeping your eyelashes out of the way.
Step 3: Focusing through the CENTER HOLE, move the
OptiWand Pincher ®
toward your eye until you touch the soft contact lens.
Step 4: Once you feel the
OptiWand Pincher ®
touch the soft contact lens you should twist it slightly then carefully pinch the soft contact lens with the Base of the
OptiWand Pincher ®
and swipe away from eye.  Some users can turn the
OptiWand Pincher ®
towards their noses after it makes contact and that will help push it out.
*Best pinching position is very close to the tip*
Final Step: Dip
OptiWand Pincher ®
into contact lens solution in current case and the lens will fall down into the solution with a pinch.