Rack media converter redundant AC power supply FRM220-AC for FRM220-CH20 chassis

Description

Item part number
FRM220-AC (90-260V AC switching power supply for FRM220 large 20 slot chassis)
Description of the whole FRM220 chassis system
FRM220-CH20 is a 20 slot chassis for fiber optic media converters. Any FRM220 series media converter can be inserted
in an FRM220-CH20 chassis. All FRM220 series media converters sold by
sales_fo4all
on eBay support the FRM220-CH20 chassis installation by simple metal cover removing and sliding the card converters into the main chassis.
Currently supported line cards include Ethernet to fiber converters for 10/100Base-TX, or 10/100/1000Base-TX over multimode fiber (up to 2 km), single mode fiber (up to 120 km) or utilizing WDM (up to 40 km). WDM (Wave Division Multiplexing) converts each input-output data stream into separate wavelengths of light and transmits/receives these channels through the same optical fiber. There is alos a good selection of 10G rate transponder cards. Besides, FRM220 line cards can also support G.703 E1/T1, Datacom (V35, X.21, RS530/ 449/ 232) and Serial (RS485/ 422/ 232) data communication interfaces over fiber.
General features of the FRM220-CH20 chassis:
2U, 19 (or 23) inch RACK with convertible standalone units, chassis accommodates up to 20 units
CPE Remote status monitor
Loop-back test
Once the converter is installed, it is hot-swappable to avoid any other network downtime. Also, the power does not have to be off when inserting another converter
Rack with Dual power modules designed for redundant power application, AC and/or DC, cooling fans included
Supports an auto recovery function, the system can restore all functions back to normal working status when the power or the connection is resumed
SNMP, console, telnet, web based management
TFTP Firmware upgrade
Windows Based GUI
The
FRM220-CH20
chassis has 3 major parts:
FRM220-CH20
- metal chassis frame (accepts 2 power supply units and NMC management card system) - the chassis can be loaded with up to 20 media converters from the FIB1 series     family (any of the media converters supplied by
sales_fo4all
on eBay can be installed in the FRM301 chassis)
FRM220-AC
- AC 90-260V power supply for FRM220-CH20. If the redundancy power supply protection feature needs to be enabled, two power supply units must be ordered for each chassis. One nice feature is the ability to mix AC and DC power supply units on a single FRM220-CH20 chassis.
FRM220-DC
- DC 18-56V power supply for FRM220-CH20
FRM220-NMC
- management module that offers web/SNMP/telnet management features for centralized monitoring of the fiber media converters. The NMC card comes with MIB files easy to compile into an existing central NMS(Network Management System).
IMPORTANT NOTICE
:
The product on sale here is the FRM220-AC power supply unit only. To have an operational FRM220 chassis, you MUST purchase
at least the main metal chassis
- the FRM220-CH20. Both power supply versions, as well as the NMC management card can be found in this section of the store.
Technical specifications:
Material
Stainless paint
Power
AC
90 — 264 VAC
DC
-18 — -56 VDC
Environment
Temperature
0 — 50°C (Operating)
0 — 70°C (Storage)
Humidity
20 — 80% non condensing (Operating)
10 — 90% (Storage)
Power Consumption
80W
Dimensions(WxDxH)
440mm x 280mm x 130.6mm
Weight
9.875kg (include 1 AC power modules & two ear panels for rack-mounting)
Compliance
FCC part 15 class A, CE Mark
MTBF
50,000 hours
All products sold by Fiber Optic for All come with 2 years manufacturer warranty.