SFP Gigabit WDM single strand BiDi A 40Km Tx:1310/Rx:1550nm Cisco compatible DDM

Description

The SFP-7040-WA is a
Bi-Directional WDM
A
type,
single strand fiber
, Gigabit Ethernet SFP (Small Form Pluggable) 1.25G optical module.Transceiver is Cisco compatible and supports DDM features.
It operates as WDM 1000BaseBX BiDi standard, covering a range of 40Km single-mode single strand fiber optical circuit. It can be used in any modern Ethernet switch equipped with SFP (miniGBIC) slots, as well as on any of the fiber optic media converters with SFP slot provided on eBay by
sales_fo4all
. The module is an A type WDM equipment using 1310nm wavelength for transmission and 1550nm wavelength for receiving data. It works in pair only with another WDM B type equipment (Tx:1550nm/Rx:1310nm).
The optical module has been tested and found 100% compatible with various Ethernet switches from major manufacturers like: Cisco, Nortel, Extreme, ZyXEL, D-Link or Netgear.
Technical Specifications:
Operating media                 :SM - singlemode fiber 9/125um (40km - distance covered)
Data rate                          :
1.25G
Optical connector               : LC
Wavelength                       :Tx:1310nm / Rx:1550nm (WDM A type module)
Max. Output Power(dBm)     :  0 dBm
Min. Output Power (dBm)     :  -3 dBm
Sensitivity (dBm)                :  -30 dBm
Power budget (dB)              :
27 dB
Diode type                        :  DFB  (distributed feedback laser diode)
All units are new.
All products sold by Fiber Optic for All come with 2 years manufacturer warranty.
!! Note:
One WDM module operates in pair with a complementary WDM module
only
. WDM modules are A and B type. This item is WDM A type and works only with another WDM B type equipment at the other end of the single strand fiber. The other equipment is not necessary from same series or same SFP type, it can be a GBIC module or built in WDM B transceiver module, but it MUST be a B type equipment.