Veracity Highwire Powerstar Duo Camera 2-Port POE Switch VHW-HWPS-C2

Description

About Us
Payment Info
Shipping Info
Customer Support
Feedback
Veracity Highwire Powerstar Duo Camera 2-Port POE Switch VHW-HWPS-C2
Brand:
Veracity
UPC:
0892314002647
Mfr Part #:
VHWHWPSC2
General Information
Connect 2 IP cameras with HIGHWIRE Powerstar Duo over an existing coax cable
HIGHWIRE Powerstar Duo makes the most of your legacy cabling and multiplies its capability by connecting two IP cameras or other network devices
Ethernet over Coax
HIGHWIRE Powerstar Duo's unique ultra low-power design and efficient power delivery enables long range Ethernet over coax. It works even over the lowest grade cable, such as the high-resistance, copper-clad steel (CCS) types found in many legacy installations. This means that legacy coax upgrades can be planned with confidence, while a quick check of the Safeview™ power level display reaffirms that the device connections will continue to be reliable, whatever the cable used.
For predictable network operation with no restrictions, HIGHWIRE technology delivers a full 200Mbit/s of bandwidth at 300m (1000 ft) of RG-59 or 500m (1600 ft) of RG-11 coax. For full information on POE-over-Coax™ distances achievable, please refer to the Range Table in the HIGHWIRE Powerstar datasheet. For POE power budget and power supply options, see the POE Power Budget Table opposite.
HIGHWIRE Powerstar DUO
The DUO variant of HIGHWIRE is designed for the camera end of the coax and, with an integrated two-port POE switch, enables connection of two IP cameras over a single coax. With no need to configure IP addresses, set DIP switches, or make awkward measurements and calculations, installing HIGHWIRE Powerstar Duo is simple. The Base end of the coax is driven by single-channel, 4-channel or 8-channel HIGHWIRE Powerstar Base unit. The DUO unit can be powered either by POE over coax, delivering a maximum total POE power budget of 25 watts, or by one of the optional local PSUs, delivering 40 or 78 watts.
HIGHWIRE Powerstar Duo features
Veracity's unique Safeview™ display, to provide IP camera installers with an instant and very easy-to-understand confirmation of correct operation from either end of the cable.
POE over Coax or Local Power
In the simplest implementation the BASE unit receives power from a standard POE switch or Veracity's 57V DC PSU and transmits POE over the coax. This is shown in the diagram below. The DUO unit receives this power and delivers up to 25 watts shared between two IP cameras. No external power cabling is required, and all detection and setup occurs automatically. For higher POE power budgets, an optional Veracity 57V DC PSU may be used to power the DUO locally at the camera end delivering 40 watts or 78 watts depending on PSU model. See POE budget table for details.
Technical Information
Maximum Extended Range:
1640.42 ft
Maximum Data Transfer Rate:
128 MB/s
Interfaces/Ports
Network (RJ-45):
Yes
Number of Network (RJ-45) Ports:
2
Physical Characteristics
Height:
1.6"
Width:
4.3"
Length:
6.8"
Miscellaneous
Additional Information:
Weight : 572 g
Connectors: RJ45 Ethernet with PoE, BNC coax with PoE, DC in
Unit Power: 20 Watt
Camera Power : 25 Watt
Certifications & Standards:
CE
FCC
Environmentally Friendly:
Yes
Environmental Certification:
RoHS
Environmental Certification:
REACH
Store Policies
Welcome to the NothingButSavings eBay Store!
To make your purchase as easy as possible, NothingButSavings requires payment via PayPal at the time of purchase. We have outlined all of our store policies below, however if you have any questions, please do not hesitate to contact us at any time.
Check-Out Now!
Click the Pay Now button at the top of this listing to immediately proceed with our checkout and payment process. Please note that the Pay Now button is ONLY available after winning an auction or completing a Buy It Now purchase.
Sales Tax
Sales tax is applied for shipments to addresses in applicable States where we are required by law to collect and remit sales tax. Purchases are not tax-exempt merely because we are not required to collect a State's Sales Tax. Your State may require you to pay use tax on your purchase. For more information, please visit your State's Department of Revenue or Sales and Use Tax website.
Shipping
For security purposes, NothingButSavings will only ship to the address provided by eBay at the time of the order. If for any reason this address is incorrect, please contact us as soon as possible to see if other arrangements can be made. NothingButSavings accepts no responsibility for incorrect delivery information contained in your eBay account at the time of purchase.
Customer Service
If you need to reach us at any time please
click here
.